Air Oasis NIND
It is typically installed in the supply side plenum.
Wed, 11 Jan, 2017 at 1:51 PM
Cut the small cord on the low voltage/output side of the included power adapter to create a pigtail. The lump in the cord is an amalgam pellet that reduces ...
Wed, 11 Jan, 2017 at 1:54 PM
If the green LED is illuminated, then the unit is working. If the green LED turns red or if the blue LED is flashing, then the AHPCO Cells need to be replac...
Wed, 11 Jan, 2017 at 1:57 PM
The nano Induct (NIND) should have a green light and blue light. A red light indicates that the lamp has failed, or there is something else that has failed ...
Wed, 11 Jan, 2017 at 2:02 PM
The nano Induct does reduce dust. It breaks the dust down and it will drop out of the air, but it does not remove dust from surfaces.
Wed, 11 Jan, 2017 at 2:07 PM
If installed and sized properly, it will produce less than .02 ppm (parts per million).
Wed, 11 Jan, 2017 at 2:10 PM
If installed and sized properly it will produce less than .02 ppm. Our units produce very little to no ozone depending on the model. The only exception are ...
Wed, 11 Jan, 2017 at 2:13 PM
It is possible. If the nano Induct unit overheats for any reason, it will automatically shut itself off, cool down, & will turn itself back on when it c...
Wed, 11 Jan, 2017 at 2:22 PM
Yes. The nano Induct model will turn your central heat and air system into a "whole house" air purifier, treating the air in every room the air co...
Mon, 16 Jan, 2017 at 4:55 PM
At least 6 inches from the heating element. Below 200 degrees. If concerned about heating strips then install on return side.
Wed, 11 Jan, 2017 at 2:29 PM